Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

YAMAHA Adecia Conference DSP-processor

Forsiden Hjem/Fritid HI-FI/Stereo YAMAHA Adecia Conference DSP-processor
Du må logge inn for å handle/se priser.
YAMAHA Adecia Conference DSP-processor (RM-CR)

YAMAHA Adecia Conference DSP-processor

Varenr.:
RM-CR
EAN:
4957812659901
  • Type Prosessor
Beskrivelse

RM-CR

Remote Conference Processor

Features:
  • Standard network audio support for "Dante"; all compatible devices can be connected with single network cable
  • Automatically recognizes connected devices on the same network for audio routing
  • Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment
  • Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones
  • Equipped with various Input/Output connections such as USB, VoIP,, analog, and Bluetooth


Specifications:

  • Dimensions W215 mm × D260 mm × H44 mm
  • Weight 1.6 kg
  • Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48 V
  • Power consumption (max) 15.0 W
  • Connector RJ 45, USB, XLR balanced, RCA
  • In Operation Temperature 0~40 ℃
  • Humidity 30 %~90 % (No condensation)
  • Storage Temperature -20~60 ℃
  • Humidity 20 %~90 % (No condensation)
  • Indicator Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3)
  • Mount Table Mount, Rack Mount
  • Maximum Device Number with RM-CR -
  • Accessories Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
  • Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit
  • Network Specifications
  • Ether1 Dante Audio/Dante Control, Remote Control, WebUI, PoE+
  • Ether2/Ether3 Corporate Network, Remote Control, SIP, WebUI
  • USB USB2.0, Network Class, WebUI, Fixed IP
  • Audio Specifications
  • Audio I/O Dante 16in/16out
  • USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz
  • Mic Input XLR balanced, Input 2 ch
  • AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch
  • Speaker Out RCA unbalanced (Line Level), Output: 2 ch
  • Bluetooth Version Bluetooth 4.2
  • Supported Profiles HFP (1.6), A2DP, AVRCP
  • Supported Codec CVSD, SBC, mSBC
  • Wireless Output Class2
  • Maximum Communication Distance 10 m (32.8 ft) (no obstacles)
  • Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz
  • Maximum Output Power (EIRP) 4.0 dBm (2.5 mW)
  • SIP Call Handling Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured)
  • Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user
  • Codecs G.711, G.722HD, G.729ab, G.726
  • DTMF Support RTP event, SIP in-band, SIP info package
  • Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs)
  • Sampling Rate 48 kHz
  • Bit Depth 24 bit
  • Latency 8 [ms] (Dante In to USB Out, includes signal processing)
  • Frequency Response 20 Hz – 20 kHz

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.